[ LOADING ]
Connect once over Modbus. TankSenseX reads every sensor, tracks every tank in 3D, graphs every trend, and flags what needs attention — live.
Connect over Modbus TCP or RTU. TankSenseX polls every mapped register continuously — live values, online status and a timestamped event log for every cycle.
TankSenseX renders the hull and all tanks in an interactive 3D model. Filling levels, systems and Low / Normal / High statuses are visualized in place, 68 tanks at a glance.
The graph analyzer tracks every channel with rising / falling detection, per-minute rates and min / max / average — filtered by system, searched by register.
During ballast exchange, bunkering or cargo ops, TankSenseX graphs every tank in real time — rate of change, min, max and average on 96 channels.
Add a Modbus TCP or RTU connection, map the holding registers once, and save the register map. No special hardware needed.
It polls every channel continuously, applies thresholds, tracks statuses and logs every cycle — autonomously.
Live levels in 3D, trends on 96 channels, and clear Low / High flags. The bridge sees what matters, when it matters.
Every tank on board — ballast, cargo, fuel, fresh water — reports to one screen, all the time.
Works with the sensors you already have. TCP and RTU connections, standard register maps, no vendor lock-in.
Low / Normal / High statuses per tank with sensor-level thresholds. Anomalies surface before they escalate.
Every poll cycle, connection event and register read is logged with local timestamps — filterable and exportable.
Light and dark modes, readable cards and a 3D view that tells the story faster than a table ever could.
Live tank levels feed straight into stability planning. Measurement to decision, one ecosystem.
Manual tank soundings during ballast exchange are replaced by one screen showing live levels and trends across every tank.
Connecting the sensors and mapping registers is typically an afternoon of work — after that, polling runs continuously without intervention.
A low tank shows up on the 3D model as soon as it crosses threshold, often before anyone would think to check a specific reading.
Every poll cycle is stamped in local time, giving class surveyors and auditors a complete record of transfer operations.
A full tank plan — dozens of tanks, dozens of channels — replaces the spreadsheets and one-off tools teams previously stitched together.
See TankSenseX against your own sensor setup. No commitment — just book a guided evaluation.
Full tank monitoring for one vessel. Complete register mapping, 3D model and support.
For operators and navies that move at scale. Fleet-wide licensing and dedicated support.
TankSenseX is a real-time tank level monitoring system for ships. It connects to the vessel’s level sensors over Modbus, tracks every tank — ballast, cargo, fuel, diesel, fresh water and miscellaneous — and presents live levels, statuses, trends and logs in one workspace.